If you are using Opera KoPilot, you can reuse the same formula between different setpoints from other compartments, zones and sites using our duplication feature.

1. Go to KoPilot feature and make sure your controller is Opera engine

2. Navigate to the end of the setpoint row on the table, click on the ellipsis button

3. Click Duplicate formula

   

   Figure 1. Duplicate formula

4. A zone selection dialog will display on the screen, select a zone then click Continue

   

   Figure 2. Select zone

5. Select one or multiple setpoints that you want to duplicate to

6. Click Apply & Review

   

   Figure 3. Select setpoint(s)

7. Review the new duplicated formulas and make any modification if needed.

8. Confirm to finish the process.

<aside> 👉🏻

Tips:

• We recommend using this duplication feature in combination with Template and auto-metrics and/or Setpoint groups
• When utilizing template or auto-metrics in a setpoint formula and subsequently duplicating that formula to another setpoint in another compartment, zone, or site, the template will automatically align with the correct variables in the chosen compartment/zone/site. </aside>

The below example shows how one formula using template metrics (Figure 4), once duplicated to another setpoint (Figure 5), will have the same structure, but different mapping based on their compartments.

Figure 4. Formula for SP Min Rail Pipe Temp 1 2

Figure 5. Formula for SP Min Rail Pipe Temp 3 4 (duplicated from the formula on the left)